|
Capacity |
200 lb, 300 lb, or 500lb. |
|
Travel
|
up to 50 ft. |
|
Stops |
up to 6 stops. |
|
Speed |
50 feet per minute |
|
Overhead |
1/2 car height
plus 8" above top of car (additional overhead required for overhead machine configurations). |
|
Loading Height |
36" min. when machine is "rail mounted"
below car (overhead or remote machine
location and/or pit, required for loading
heights below 36"). |
|
Guide Rails |
heavy gauge steel channel. |
|
Electric Supply |
230 volts, single phase standard.
208/230 volts, three phase, available.
For 208 volts, single phase, a Buck Boost
transformer must be added. |
|
Powerhead |
single speed winding drum with 1 HP or 2 HP
motor. |
|
Brake |
electromagnetic disc brake, electrically
released and spring applied. |
|
Controls |
momentary contact call/send push buttons at
each landing. |
|
Safeties |
twin instantaneous broken cable, applied by
a retained compression spring. |
|
Cable |
3/16" or 7/32" diameter aircraft cable. |
|
Hoistway Door Interlocks |
required at each landing. |
|
Emergency Lowering |
manual hand crank |
