018
 Custom Lift Drive System
The Custom-Lift® is our economy model. It has a long history of dependability and versatility. With a variety of sheave and machine room layouts, the Custom-Lift elevator is suited to new construction or a remodeling project. Choose your elevator car from our beautiful standard collection.

Technical

  • Capacity -500 lbs.
  • Cab Size - maximum of 12 sq. ft.
  • Travel - up to 50 ft.
  • Stops - up to 6 stops
  • Nominal Speed - 30 feet per minute
  • Guide Rail - 3/16" steel channel
  • Pit Depth - 6" minimum required
  • Overhead - 12" minimum overhead clearance required above the cab's inside dimension height

Electric Supply - 230 volts, single phase, 60 hertz. For 208 volts, single phase, a Buck Boost transformer must be added. A separate 120-volt circuit is required for cab lighting..

Controls - fully automatic at car and landings, car light switch, emergency stop switch, in/use indicator at landings.

  

Drive - single speed, 2HP, instant reversing.

Gearbox - high-ratio, direct mounted and coupled.

Drum - single drum with outboard bearing.

Brake - electrically released, spring applied.

Signal Systems - wall mount phone jack, emergency alarm.

Emergency Lowering - manual hand wheel.

Slack Cable/Broken Rope - twin instantaneous, broken and slack cable applied by retained compression spring.

Car - Frameless car with accordion gate.

Additional Options - are available, for details contact your local dealer

.


* Custom Lift Spec Sheet (PDF)
* Contact your dealer for exact specifications for any of these models or complete spec sheets